--- title: "Configuring notification of inline packet inspection process state changes (CLI)" slug: "configuring-notification-of-inline-packet-inspection-process-state-changes-cli" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-12T20:38:44Z published: 2026-09-12T20:38:44Z canonical: "docs.trellix.com/configuring-notification-of-inline-packet-inspection-process-state-changes-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring notification of inline packet inspection process state changes (CLI) You can configure an IPS platform to send email notifications whenever the state of the inline packet inspection process state changes. This option can be configured through the Network Security appliance CLI only. ##### Prerequisites Before you configure an IPS platform for email notification when the inline packet inspection process starts or stops, perform the following prerequisite tasks: - Log in to the appliance CLI as Operator or Admin. - Use the `fenotify default timezone` CLI command in configuration mode to set the default time zone for FireEye notifications. For more information, see the Network Security System Administration Guide and the CLI Command Reference. - Configure email settings for administrative events, as described in "Configuring Administrative Email Settings Using the CLI" in the Network Security User Guide. ``` hostname (config) # email ? auth               Set authentication options for sending email autosupport        Set handling of automatic support email dead-letter        Configure settings for saving undeliverable emails domain             Override domain from which emails appear to come mailhub            Set the mail relay to be used to send emails mailhub-port       Set mail port to be used to send emails notify             Set handling of events and failures via email return-addr        Set the username in the return address for email notifications return-host        Include hostname in return address for email notifications send-test          Send test email to all configured event and failure recipients ssl                Configure security options for email ``` ##### Procedure To configure email notifications for inline packet inspection process state changes: 1. Enable the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Check the email settings for administrative events by using the `show email` command. In the following example, email notifications for administrative events are configured to be sent to the email address `my-first.my-last@my-domain.com`. ``` hostname # show email Mail hub:         172.16.2.27 Mail hub port:    25 Domain override:  www.my-domain-override.com Return address:   do-not-reply Include hostname in return address: yes Current reply address: do-not-reply@my-host.www.my-domain-override.com Security mode:        tls-none Verify server cert:   yes Supplemental CA list: default-ca-list SMTP authentication: disabled Dead letter settings:  Save dead.letter files: yes  Dead letter max age:    14 days Email notification recipients:  my-first.my-last@my-domain.com (all events, in detail) Autosupport emails  Enabled:       yes  Recipient:     eng-autosupport@fireeye.com  Mail hub:       owa.fireeye.com  Security mode:        tls-none  Verify server cert:   yes  Supplemental CA list: default-ca-list  SMTP authentication:  disabled ``` 3. Enable or disable notifications when the inline packet inspection process stops. Enter one of the following forms of the `email notify event` command: - To enable notifications when the inline packet inspection process stops, enter the email notify event command, and specify the `inline‑engine‑down` parameter. - To disable this notification option, you would use the `no` form of the command. The following example command enables notifications when inline packet inspection processing stops. ``` hostname (config) # email notify event inline-engine-down ``` 4. Enable or disable notifications when the inline packet inspection process starts. Enter one of the following forms of the `email notify event` command: - To enable notifications when the inline packet inspection process starts, enter the `email notify event` command, and specify the `inline‑engine‑up` parameter. - To disable this notification option, you would use the `no` form of the command. ``` hostname (config) # email notify event inline-engine-up ``` 5. Save your changes. ``` hostname (config) # write memory ``` :