--- title: "Configuring NTP authentication using the CLI" slug: "configuring-ntp-authentication-using-the-cli-4" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T20:40:08Z published: 2026-08-24T20:40:08Z canonical: "docs.trellix.com/configuring-ntp-authentication-using-the-cli-4" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring NTP authentication using the CLI This topic describes how to configure NTP authentication using the CLI. ### Enabling NTP authentication and configuring keys Perform the tasks in this section in the order shown to configure NTP authentication. **Obtain the authentication keys from the NTP server:** 1. On the NTP server, map a key ID from 1–16 to an MD5 or SHA1 hash value. 2. Repeat the previous step for additional key ID/value pairs. 3. Copy and paste the key ID/value pairs so they can be configured on the appliance later in this procedure. **Enable NTP and NTP authentication:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. View the current status. ``` hostname (config) # show ntp configured ``` 3. If `NTP enabled: no` appears in the command output, enable NTP. ``` hostname (config) # ntp enable ``` 4. If `NTP Authentication enabled: no` appears is the command output, enable NTP authentication. ``` hostname (config) # ntp authentication enable ``` **Define the authentication keys:** 1. Use the following command to configure the key ID and hash value you obtained from the NTP server: ``` hostname (config) # ntp authentication key hash ``` where: - `<number>` is an integer from **1**–**16** - `<type>` is **md5** or **sha1** - `<value>` is the hash value 2. Repeat the previous step for each key you want to define. 3. View the configured keys. ``` hostname (config) # show ntp authentication configured ``` 4. Save your changes. ``` hostname (config) # write memory ``` **Assign the keys to the NTP servers:** 1. To assign a key to an NTP server, use the `ntp server <server> authentication key <number>` command, where `<server>` is the IP address or hostname of the NTP server, and `<number>` is the integer that you assigned to the key in the previous task The following example assigns hash key 1 to the NTP server 0.acme.pool.ntp.org: ``` hostname (config) # ntp server 0.acme.pool.ntp.org authentication key 1 ``` 2. Repeat the previous step for each key you want to define. 3. View the assigned keys: ``` hostname (config) # show ntp configured ``` 4. Verify that the keys are valid: ``` hostname (config) # show ntp authentication ``` 5. Save your changes: ``` hostname (config) # write memory ``` ### Disabling NTP authentication and removing keys You cannot delete an authentication key from the system if it is mapped to an NTP server. If a key is mapped to an NTP server, you must disable NTP authentication on that server before you delete the key. **To disable NTP authentication on the system:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Disable NTP authentication: ``` hostname (config) # no ntp authentication ``` 3. Save your changes: ``` hostname (config) # write memory ``` **To disable NTP authentication on a specific server:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. To disable NTP authentication with a specified NTP server, use the `no ntp server <server> authentication` command, where `<server>` is the hostname or IP address of the NTP server. The following example disables NTP authentication with the NTP server with hostname 1.acme.pool.ntp.org: ``` hostname (config) # no ntp server 1.acme.pool.ntp.org authentication ``` 3. Save your changes: ``` hostname (config) # write memory ``` **To delete an NTP authentication key:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. To delete a key, use the `no ntp authentication key <number>` command, where `<number>` is the key ID. ``` hostname (config) # no ntp authentication key 1 ``` 3. Save your changes: ``` hostname (config) # write memory ``` ### Examples The following example shows the current configuration. ``` hostname (config) # show ntp configured NTP enabled: yes NTP Authentication enabled: yes No NTP peers configured. NTP server 0.acme.pool.ntp.org  Enabled: yes  NTP version: 4  Key: none NTP server 1.acme.pool.ntp.org  Enabled: yes  NTP version: 4  Key: none NTP server 2.acme.pool.ntp.org  Enabled: yes  NTP version: 4  Key: none ``` The following example defines two authentication keys and assigns each one to an NTP server. ``` hostname (config) # ntp authentication key 1 hash md5 153ffa51cc765fb257e384e8e6aec8fe ``` ``` hostname (config) # ntp server 0.acme.pool.ntp.org key 1 ``` ``` hostname (config) # ntp authentication key 2 hash sha1 27a048b642be47d50a9c38427495945429597d91 ``` ``` hostname (config) # ntp server 1.acme.pool.ntp.org key 2 hostname (config) # show ntp configured NTP enabled: yes NTP Authentication enabled: yes No NTP peers configured. NTP server 0.acme.pool.ntp.org  Enabled: yes  NTP version: 4  Key: 1 NTP server 1.acme.pool.ntp.org  Enabled: yes  NTP version: 4  Key: 2 NTP server 2.acme.pool.ntp.org  Enabled: yes  NTP version: 4  Key: none ``` ``` hostname (config) # show ntp authentication configured NTP enabled: yes NTP Authentication enabled: yes NTP Key Number 1  Type: md5  Key: 153ffa51cc765fb257e384e8e6aec8fe NTP Key Number 2  Type: sha1  Key: 27a048b642be47d50a9c38427495945429597d91 hostname (config) # show ntp authentication NTP is administratively enabled. NTP authentication is administratively enabled. Active servers and peers: Address           auth      keyid ===================================== 172.16.2.3        ok         1 10.30.4.3         ok         2 192.168.10.12     none       none ``` The following example disables NTP authentication on the 1.acme.pool.ntp.org server and then deletes the key it was using from the system. ``` hostname (config) # no ntp server 1.acme.pool.ntp.org authentication hostname (config) # no ntp authentication key 2 ```