--- title: "Configuring password change frequency using the CLI" slug: "configuring-password-change-frequency-using-the-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:12Z published: 2026-09-01T19:03:12Z canonical: "docs.trellix.com/configuring-password-change-frequency-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring password change frequency using the CLI You can specify how often users must change their passwords using the `aaa authentication password local require-change max-password-age all` command. For a managed appliance, you can perform this procedure on the Central Management System appliance as well as the local appliance. Use `cmc execute appliance <applianceName> command "aaa authentication password local require-change max-password-age all <days>"` and specify the managed appliance’s hostname in the Central Management System appliance. See the *Trellix Central Management System Administration Guide* for details. Prerequisites - Admin access To configure the password change frequency: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Specify the number of days before a password must be changed. Use the following command: ``` aaa authentication password local require-change max-password-age all ``` where` <days> `is a values from 1 through 999. 3. Verify your change: ``` hostname (config) # show aaa authentication password ``` 4. Save your changes: ``` hostname (config) # write memory ``` :