--- title: "Configuring proxy based inbound SSL decryption at device level" slug: "configuring-proxy-based-inbound-ssl-decryption-at-device-level-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:39Z published: 2026-11-19T12:27:39Z canonical: "docs.trellix.com/configuring-proxy-based-inbound-ssl-decryption-at-device-level-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring proxy based inbound SSL decryption at device level To enable Inbound SSL/TLS decryption using proxy, you must purchase the System license and add it in the Manager. The System license required for proxy based TLS decryption is the same for both inbound and outbound. To enable proxy based inbound TLS decryption, perform the following steps: 1. Go to **Devices** → **** → **Devices** → **** → **Setup** → **TLS Decryption**. 2. On the **Inbound** tab, **Decryption Settings** is displayed. 3. Deselect **Inherit Settings** to override the settings of the parent domain. 4. Select the **Enable Inbound Decryption** checkbox. 5. To enable SSL decryption using proxy, select **Proxy** from the **Decryption Method** drop-down. > [!NOTE] > Note > > Ensure that the **Inbound Proxy Rules** has been created for the server you wish to protect. 6. Click **Save**. > [!NOTE] > Note > > If a valid System license is not assigned to a Sensor, a warning **The device requires a valid System license** is displayed in the **Deploy Pending Changes** page for that particular Sensor. To assign a valid license, see the section [Add a System license to the Manager](/network-and-platform/docs/add-a-system-license-to-the-manager-1). > [!NOTE] > Note > > Reboot of the Sensor is required after you enable inbound SSL decryption for the feature to function. If you have already configured proxy based outbound SSL decryption, the reboot is not required.