--- title: "Configuring proxy based inbound SSL decryption at domain level" slug: "configuring-proxy-based-inbound-ssl-decryption-at-domain-level-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:39Z published: 2026-11-19T12:27:39Z canonical: "docs.trellix.com/configuring-proxy-based-inbound-ssl-decryption-at-domain-level-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring proxy based inbound SSL decryption at domain level To enable Inbound SSL decryption using proxy, you must purchase the System license and add it in the Manager. The System license required for proxy based SSL decryption is the same for both inbound and outbound. > [!WARNING] > Important > > If you enable or disable proxy based SSL decryption on a Sensor, you must reboot the Sensor for the changes to take effect. You can opt for a hitless or full reboot. > > For NS-series Sensors, you must do a full reboot as hitless reboot is not supported when SSL decryption is enabled. To enable proxy based inbound TLS/SSL decryption, perform the following steps: 1. Select **Devices** → **** → **Global** → **IPS Device Settings** → **TLS Decryption**. 2. On the **Inbound** tab, **Decryption Settings** tab is displayed. 3. Select the **Enable Inbound Decryption** checkbox. 4. From the **Decryption Method** drop-down, select **Proxy**. 5. Click **Save**. > [!NOTE] > Note > > Reboot of the Sensor is required after you enable outbound SSL decryption for the feature to function. If you have already configured proxy based inbound SSL decryption, the reboot is not required.