--- title: "Configuring proxy based outbound SSL/TLS decryption at the domain level" slug: "configuring-proxy-based-outbound-ssl-tls-decryption-at-the-domain-level-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:25:43Z published: 2026-11-19T12:25:43Z canonical: "docs.trellix.com/configuring-proxy-based-outbound-ssl-tls-decryption-at-the-domain-level-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring proxy based outbound SSL/TLS decryption at the domain level **Prerequisite:** To enable proxy based outbound SSL/TLS decryption, you must purchase the System license and add it in the Manager. The System license required for proxy based SSL/TLS decryption is the same for both inbound and outbound. To enable proxy based outbound SSL/TLS decryption, perform the following steps: > [!NOTE] > Note > > From 11.1.5.122, jumbo frame traffic with SSL/TLS encryption will be decrypted when SSL/TLS decryption is enabled. 1. Go to **Devices** → **** → **Global** → **IPS Device Settings** → **TLS Decryption**. 2. On the **Outbound** tab, select **Decryption Settings** tab. 3. Select the **Enable Outbound Decryption** checkbox. ![Outbound_DomainLevel.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-8c94ca43-9eaf-ef3c-182e-19f13b4ef12c(3).png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A14Z&se=2026-11-20T09%3A36%3A14Z&sr=c&sp=r&sig=CjnrmfH8LLR7oiS0jZ%2FuhkFS2h9NbxVWTOXDNt%2FSXpk%3D) 4. Select the required action from the **Untrusted/Expired Server Certificate** drop-down. The reasons for failure can be due to the Sensor not being able to validate the web server's certificate. This happens when the certificate signed by a CA is not on the Sensor's trusted CA list. The descriptions for the possible Sensor actions in case of a failure are as follows: | Action | Description | | --- | --- | | **Decrypt** | The Sensor decrypts the flows from the web server. | | **Block Flow** | The Sensor blocks the flows from the web server. | 5. Click **Save**. > [!NOTE] > Note > > If a valid System license is not assigned to a Sensor, a warning **The device requires a valid System license** is displayed in the **Deploy Pending Changes** page for that particular Sensor. To assign a valid license, see section [Add a System license to the Manager](/network-and-platform/docs/add-a-system-license-to-the-manager-1). 6. If you change the mode of operation for SSL/TLS decryption, or disable SSL/TLS decryption, a reboot of the Sensor is required. > [!NOTE] > Note > > Reboot of the Sensor is required after you enable outbound SSL/TLS decryption for the feature to function. If you have already configured proxy based inbound SSL/TLS decryption, reboot is not required. 1. Go to, **Manager** → **** → **Troubleshooting** → **Logs** → **Faults**. 2. View the critical messages for the corresponding Sensor to see if a Sensor reboot is required. 3. If yes, perform a full reboot of the Sensor.