Configuring QoS

The high-level steps to configure QoS are as follows:

1. Create the required rule objects.
2. Define the Rate Limiting profile and assign it to the required inline port pairs. This is required only if you intend to use the Rate Limiting technique for QoS.
3. Define the QoS policy with the component rules for Rate Limiting, DiffServ, and 802.1p.
4. Assign the QoS policy to the required inline port pairs.

The QoS Policy configuration report details the configuration information for each port on the Sensor. To access this report, select the domain on the Manager tab. Then select Reporting → Configuration Reports → QoS Policy. See Trellix Intrusion Prevention System Product Guide for information on how to generate this report.