--- title: "Configuring retroactive detection updates from AV-Suite using the CLI" slug: "configuring-retroactive-detection-updates-from-av-suite-using-the-cli-2" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T20:40:19Z published: 2026-08-24T20:40:19Z canonical: "docs.trellix.com/configuring-retroactive-detection-updates-from-av-suite-using-the-cli-2" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring retroactive detection updates from AV-Suite using the CLI Follow these steps to configure retroactive detection updates from AV-Suite using the CLI. **To configure the retroactive detection updates from AV-Suite:** 1. Go to CLI configuration mode: ``` vx-hostname > enable vx-hostname # configure terminal ``` 2. Specify the update time interval. ``` vx-hostname (config) # analysis retro-hunt update interval ``` The range is from 10 to 86400 seconds. The default value is 300 seconds. 3. Save your changes. ``` vx-hostname (config) # write memory ``` 4. Verify the setting for how often the Intelligent Virtual Execution - Server appliance queries the AV-Suite server for previous retroactive verdicts. ``` vx-hostname (config) # show analysis config  .....    Analysis reset duplicate since           : 2018/04/19 10:41:23    Retroactive hunting                      : Enabled    Retroactive hunting time                 : 0 hours    Retroactive update interval             : 300 seconds    VM throttling                            : AUTO    ..... ```