--- title: "Configuring retroactive detection updates from AV-Suite using the CLI" slug: "configuring-retroactive-detection-updates-from-av-suite-using-the-cli-6" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Customer", "Network Security"] updated: 2026-09-07T21:14:23Z published: 2026-09-07T21:14:23Z canonical: "docs.trellix.com/configuring-retroactive-detection-updates-from-av-suite-using-the-cli-6" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring retroactive detection updates from AV-Suite using the CLI Follow these steps to configure retroactive detection updates from AV-Suite using the CLI. **To configure the retroactive detection updates from AV-Suite:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Specify the update time interval. ``` hostname (config) # analysis retro-hunt update interval ``` The range is from 10 to 86400 seconds. The default value is 300 seconds. 3. Save your changes. ``` hostname (config) # write memory ``` 4. Verify the setting for how often the Malware Analysis appliance queries the AV-Suite server for previous retroactive verdicts. ``` hostname (config) # show analysis config  .....    Analysis reset duplicate since           : 2018/04/19 10:41:23    Retroactive hunting                      : Enabled    Retroactive hunting time                 : 0 hours    Retroactive update interval             : 300 seconds    VM throttling                            : AUTO    Riskware detection                       : Disabled    Block Riskware                           : No    ..... ```