--- title: "Configuring riskware file blocking using the Web UI" slug: "configuring-riskware-file-blocking-using-the-web-ui" updated: 2026-09-08T21:44:57Z published: 2026-09-08T21:44:57Z canonical: "docs.trellix.com/configuring-riskware-file-blocking-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring riskware file blocking using the Web UI Follow these steps to globally enable or disable the blocking of files based on riskware detected by Trellix Riskware rules on the File Protect appliance. ### Note Riskware detection alerts are generated by default when files are blocked. ![EX_RiskwareAdwareRulesEnableDisable_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-bea89783-b1b3-961d-7d5c-73a44f05bcb1(3).png?sv=2026-02-06&spr=https&st=2026-11-20T04%3A09%3A09Z&se=2026-11-20T05%3A09%3A09Z&sr=c&sp=r&sig=QuUzuQ6Gsf6bCu32Nmvob2aTRU3R%2BUCfY7XNbicgZF8%3D)To enable blocking files based on riskware detected by the Trellix Riskware rules: 1. In the Web UI, choose **Settings** > **Riskware Policy**. 2. Select the **FireEye Riskware Rules** tab. 3. Click the **Quarantine** checkbox for the **Trellix** **Riskware** rules. 4. Click **Apply**. The following message appears: ``` Updated selected Riskware Rules. ``` To disable blocking files based on riskware detected by the Trellix Riskware rules: 1. In the Web UI, choose **Settings** > **Riskware Policy**. 2. Select the **FireEye Riskware Rules** tab. 3. Clear the **Quarantine** checkbox for the **Trellix****Riskware**rules. 4. Click **Apply**. The following message appears: ``` Updated selected Riskware Rules. ``` :