--- title: "Configuring riskware file blocking" slug: "configuring-riskware-file-blocking" updated: 2026-10-02T15:21:19Z published: 2026-10-02T15:21:23Z canonical: "docs.trellix.com/configuring-riskware-file-blocking" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring riskware file blocking You can enable or disable blocking files based on riskware detected by Trellix Riskware rules by using the File Protect appliance Web UI or CLI: - [Configuring riskware file blocking using the Web UI](/network-and-platform/docs/configuring-riskware-file-blocking-using-the-web-ui) - [Configuring riskware file blocking using the CLI](/network-and-platform/docs/configuring-riskware-file-blocking-using-the-cli) When you enable riskware detection both to generate a riskware alert and to block a file, the File Protect appliance blocks files that might be suspicious. In this scenario, a malware object event notification is generated if the sample is detected as riskware. You can view the analysis results on the **eAlerts** > **Alerts** page in the Web UI. ### Note Blocking files based on the riskware detection feature is disabled by default. ### Prerequisites - Administrator or Operator access to the File Protect appliance - An established connection to the Internet - A connection to the DTI Cloud - Download and install the latest security content with new riskware policy rules by using the `fenet security-content apply-update` command, For details about how to update security content, refer to the System Administration Guide. :