--- title: "Configuring S3 on-prem storage" slug: "configuring-s3-on-prem-storage" updated: 2026-09-08T21:45:37Z published: 2026-09-08T21:45:37Z canonical: "docs.trellix.com/configuring-s3-on-prem-storage" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring S3 on-prem storage To integrate File Protect with S3 on-prem, configure the user details in the Web UI: 1. Log in to the File Protect appliance Web UI. 2. Go to **Settings > Storage**. 3. In the section, **S3 On-Prem Configuration**, enter the following details: - Hostname (TM node: /fireeye/fmps/config/s3_onprem/server_ip) - Port (TM node: /fireeye/fmps/config/s3_onprem/server_port) - Access Key ID (TM node: /fireeye/fmps/config/s3_onprem/access_id) - Secret Access Key (TM node: /fireeye/fmps/config/s3_onprem/secret) ![FX_S3OnPrem1.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-a54ae70b-d34f-8bba-d05f-3d071bd7d35c(2).png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A02Z&se=2026-11-20T09%3A36%3A02Z&sr=c&sp=r&sig=XBU36muev8jpuBfaWmbmZw82m7moVFJBIGzZ8Z1w8aw%3D) To integrate File Protect with S3 on-prem, configure the user details in the CLI 1. Enable the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Enter the access ID key: ``` hostname (config) # fmps s3-onprem config access-id ``` 3. Enter the secret key: ``` hostname (config) # fmps s3-onprem config secret ``` ### Note The Access key and Secret access key are set in the S3 on-prem storage host. The storage administrator has the permission to set these keys in the host platform. 4. Enter the name of host where the storage is maintained: ``` hostname (config) # fmps s3-onprem config hostname ``` 5. Enter the HTTPS port on which the S3 APIs are enabled on the S3 on-prem storage: ``` hostname (config) # fmps s3-onprem config port ``` 6. Save your changes: ``` hostname (config) # write memory ``` 7. Check the details you entered: ``` hostname (config) # show fmps s3-onprem config ``` :