--- title: "Configuring scan results folders using the CLI" slug: "configuring-scan-results-folders-using-the-cli-1" updated: 2026-09-08T21:44:57Z published: 2026-09-08T21:44:57Z canonical: "docs.trellix.com/configuring-scan-results-folders-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring scan results folders using the CLI Use the commands in this section to configure scan results folders using the CLI. ### Note You can use these commands only on scans that are in the "configured" state. You cannot configure active, paused, aborted, completed, or scheduled scans. To configure scan results folders: 1. Enable the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Verify the status of the share to which you want to map the folder: ``` hostname (config) # show fmps file shares shareName ``` 3. Specify the results folder: - To configure a folder for non-malicious files: ``` hostname (config) # fmps scan configure scanID target-shares good shareName ``` - To configure a folder for malicious files: ``` hostname (config) # fmps scan configure scanID target-shares quarantine shareName ``` - To configure a folder for unknown files: ``` hostname (config) # fmps scan configure scanID target-shares unknown shareName ``` - To configure a folder for whitelist files: ``` hostname (config) # fmps scan configure scanID target-shares whitelisted shareName ``` 4. Save your changes: ``` hostname (config) # write memory ``` ### Example The following example shows how to check the status of the Acme-good share and then configure a "good" folder for scan 37. ``` hostname (config) # show fmps file shares Acme-good Share Name:   Acme-good Enabled:      yes Description:  ******** Share URL:    //10.14.40.30/IX-good Mount command prefix:     mount --no-mtab -t cifs -o sec=ntlmsspi Share user:  fmps-dfs\Administrator Share password:    ******** hostname (config) # fmps scan configure 37 target-shares good Acme-good ``` :