--- title: "Configuring SmartVision alert notifications using the CLI" slug: "configuring-smartvision-alert-notifications-using-the-cli" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-10-01T18:40:59Z published: 2026-10-01T18:40:59Z canonical: "docs.trellix.com/configuring-smartvision-alert-notifications-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring SmartVision alert notifications using the CLI Follow these steps to configure an appliance to distribute SmartVision alerts using Trellix event notification services. ### Prerequisites - Admin or Operator access to the SmartVision appliance. - SmartVision is enabled. To configure alert distribution by Trellix event notifications: 1. Log in to the appliance CLI and go to configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. Make sure the notification services you want to use are globally enabled. Use the `show fenotify alerts` command and check the Global row. See [Globally enabled Trellix event notification services](/network-and-platform/docs/about-configuring-alert-notifications). 3. If an event notification service you want to use is globally disabled, enable it by using the following command: ```plaintext fenotify enable ``` Replace the `<protocol>` variable with `email`, `http`, `rsyslog`, or `snmp`. The following example globally enables all Trellix event notification services: ```plaintext hostname (config) # fenotify email enable hostname (config) # fenotify http enable hostname (config) # fenotify rsyslog enable hostname (config) # fenotify snmp enable ``` 4. Make sure the services and service consumers are configured and enabled. For details, see “Configuring Event Notifications” in the *Network Security User Guide*. 5. Make sure the distribution of SmartVision alerts is globally enabled. Use the `show fenotify alerts` command and check the Global column. See [Globally Enabled Distribution of SmartVision alerts](/network-and-platform/docs/about-configuring-alert-notifications#globally_enabled_distribution_of_smartvision_alerts). 6. If SmartVision alerts are globally disabled, use the following command to enable them: ```plaintext hostname (config) # fenotify alert smartvision-event enable ``` 7. Enable SmartVision alert notifications for each service you want to use. By manufacturing default, SmartVision alert notifications are disabled for all notification services. See [SmartVision alerts enabled for individual notification services](/network-and-platform/docs/about-configuring-alert-notifications#alerts_enabled_for_individual_notification_services). To enable SmartVision alert distribution by a Trellix event notification service, use the following command. Replace the `<protocol>` variable with the protocol for the notification service (`email`, `http`, `rsyslog`, or `snmp`). ```plaintext fenotify alert smartvision-event enable ``` The following example enables SmartVision alert distribution by all Trellix event notification services: ```plaintext hostname (config) # fenotify email alert smartvision-event enable hostname (config) # fenotify http alert smartvision-event enable hostname (config) # fenotify rsyslog alert smartvision-event enable hostname (config) # fenotify snmp alert smartvision-event enable ``` 8. Verify that a test-fired SmartVision event triggers the expected notifications. ```plaintext hostname (config) # fenotify test-fire smartvision-event Sending test notification... ``` For details, including a Web UI procedure, see the *Network Security User Guide*. 9. View your changes. ```plaintext hostname (config) # show fenotify alerts ``` 10. Save your changes. ```plaintext hostname (config) #  write memory ``` 11. (Optional) Filter Trellix event notifications for alerts by severity. See [Filtering SmartVision event notifications by severity](/network-and-platform/docs/filtering-smartvision-event-notifications-by-severity).