Use the Define protocols section on the SNMP tab of the Notification settings page to configure default SNMP settings.
.png "All_SNMPSettings_scap.png")
To configure SNMP notifications:
Click Settings > CM settings.
Click Notifications on the side bar.
Click the SNMP tab.
Locate the Define protocols settings section.
Per event is selected in the Default delivery drop-down list box. This sends a notification each time an event of this type occurs.
Select the SNMP version (1 or 2c) to use for the notification in the Version drop-down list box.
If you need the MIB file, click Download.
Click Apply settings.
Note
If you do not click Apply settings, your changes are lost.