--- title: "Configuring SNMP settings using the Web UI" slug: "configuring-snmp-settings-using-the-web-ui-3" updated: 2026-08-25T21:17:55Z published: 2026-08-25T21:17:55Z canonical: "docs.trellix.com/configuring-snmp-settings-using-the-web-ui-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring SNMP settings using the Web UI Use the **Define protocols** section on the **SNMP** tab of the **Notification settings** page to configure default SNMP settings. ![All_SNMPSettings_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-cb66e7ae-c10b-859a-61ef-4462535d7a9c(1).png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A05Z&se=2026-11-20T09%3A36%3A05Z&sr=c&sp=r&sig=rNvwbJRb9LC3FkAJ4vBU4Y1exizJi%2BzchqhR307xhXw%3D)To configure SNMP notifications: 1. Click **Settings** > **CM settings**. 2. Click **Notifications** on the side bar. 3. Click the **SNMP** tab. 4. Locate the **Define protocols settings** section. - Per event is selected in the **Default delivery** drop-down list box. This sends a notification each time an event of this type occurs. - Select the SNMP version (**1** or **2c**) to use for the notification in the **Version** drop-down list box. - If you need the MIB file, click **Download**. 5. Click **Apply settings**. ### Note If you do not click **Apply settings**, your changes are lost. :