--- title: "Configuring Snort engine at a device level" slug: "configuring-snort-engine-at-a-device-level-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:36Z published: 2026-11-19T12:30:36Z canonical: "docs.trellix.com/configuring-snort-engine-at-a-device-level-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring Snort engine at a device level To configure the appropriate snort engine at a device level, perform the following steps: 1. Go to **Devices** → **** → **Global** → **IPS Device Settings** → **Advanced Device Settings**. The **Advanced Device Settings** page appears. 2. Uncheck the Inherit Settings? checkbox to get access to modify settings in this page. 3. Select **Inspect Tunneled Traffic** if you want to inspect GRE, GTP, and tunneled IPv4 and IPv6 traffic. 4. To select the snort engine, click the **Snort Rule Engine** dropdown and select **Suricata Snort**. A pop-up appears asking you to confirm your changes and informing you that a reboot will be necessary for the change to take effect. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/image(121).png?sv=2026-02-06&spr=https&st=2026-11-20T17%3A05%3A06Z&se=2026-11-20T18%3A05%3A06Z&sr=c&sp=r&sig=YJk9SucRXMrqVwJForh5CFoMWV6fRD1Pvw3yJey7XvM%3D) 5. Click **OK** and then click **Save** at the bottom of the page. 6. Reboot the Sensors which require this change. After the reboot, the **Advanced Device Settings** page of the Sensor displays Suricata Snort.