--- title: "Configuring Snort engine at a global level" slug: "configuring-snort-engine-at-a-global-level-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:36Z published: 2026-11-19T12:30:36Z canonical: "docs.trellix.com/configuring-snort-engine-at-a-global-level-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring Snort engine at a global level To configure the appropriate snort engine at a global level, perform the following steps: 1. Go to **Devices** → **** → **Global** → **IPS Device Settings** → **Advanced Device Settings**. The default engine selected is the Trellix IPS Snort engine. 2. To select the snort engine, click the **Snort Rule Engine** dropdown and select the **Suricata Snort**. A pop-up appears asking you to confirm your changes and informing you that a reboot will be necessary for the change to take effect. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/image(123).png?sv=2026-02-06&spr=https&st=2026-11-20T16%3A57%3A13Z&se=2026-11-20T17%3A57%3A13Z&sr=c&sp=r&sig=Kns2DPVG02U0DbQPYiYdywYKgy36bfpVpf4lr49LuPo%3D) 3. Click **OK** and then click **Save** at the bottom of the page. 4. Reboot the Sensors which require this change. After the reboot, the **Advanced Device Settings** page of the Sensor displays Suricata Snort.