--- title: "Configuring SPAN mode using the Web UI" slug: "configuring-span-mode-using-the-web-ui" tags: ["Network Security (NX)"] updated: 2026-08-24T22:01:11Z published: 2026-08-24T22:01:11Z canonical: "docs.trellix.com/configuring-span-mode-using-the-web-ui" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring SPAN mode using the Web UI Use the **Policy Settings** page to configure the Network Security appliance to receive network traffic from the SPAN ports of a device with port mirroring capabilities. In SPAN mode, you can configure the appliance with one or two network port pairs. The following example shows one network port pair. ![NX_TAPDeplyment_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-b1c3cc50-e01e-1900-bcad-89b67d3c11b2.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A53%3A53Z&se=2026-11-20T07%3A53%3A53Z&sr=c&sp=r&sig=svaiXveiWDzZ7x1bIJxOsCLFADwsu%2FtK%2F0NehYZynA4%3D) The following example shows two network port pairs. ![NX_TAP_WebUI_2pp_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0315bee0-4885-2a24-af57-07b59f0dcb59.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A53%3A53Z&se=2026-11-20T07%3A53%3A53Z&sr=c&sp=r&sig=svaiXveiWDzZ7x1bIJxOsCLFADwsu%2FtK%2F0NehYZynA4%3D)Prerequisites - Operator or Admin access To configure SPAN mode: 1. Click the **Settings** tab. 2. Click **Inline Operational Modes** on the sidebar. 3. Select the **TAP** operational mode for all available port pairs. 4. Click **Update: Operational Modes**.