--- title: "Configuring SSL decryption with third-party devices using the CLI" slug: "configuring-ssl-decryption-with-third-party-devices-using-the-cli" tags: ["Network Security (NX)"] updated: 2026-08-24T22:01:11Z published: 2026-08-24T22:01:11Z canonical: "docs.trellix.com/configuring-ssl-decryption-with-third-party-devices-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring SSL decryption with third-party devices using the CLI Use the CLI commands in this topic to configure SSL decryption with third-party devices on the NX 300 models or NX 400 models. To configure SSL decryption with third-party devices on the NX 300 models: 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable a different interface to receive decrypted SSL traffic on the Network Security appliance. ``` hostname (config) # policymgr session interface enable ``` 3. Save your changes. ``` hostname (config) # write memory ``` To configure SSL decryption with third-party devices on the NX 400 models: 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Add a VLAN tag to traffic that arrives on a different port pair. ``` hostname (config) #_debug foxd config custom enable hostname (config) # _debug foxd config custom vlan enable ``` 3. Enable a different interface to receive decrypted SSL traffic on the Network Security appliance. ``` hostname (config) # policymgr session interface enable ``` 4. Save your changes. ``` hostname (config) # write memory ``` 5. Verify the status of VLAN support. ``` hostname (config) # _debug show foxd config custom foxd customized config: yes  vlan support        : yes  ........ ``` 6. Restart the network content processing engine on the appliance. ``` hostname (config) # pm process foxd restart ``` 7. Restart the process to submit files to the virtual machine (VM) for a complete analysis. ``` hostname (config) # pm process silverfish restart ```