--- title: "Configuring TAP mode using the Web UI" slug: "configuring-tap-mode-using-the-web-ui" tags: ["Network Security (NX)"] updated: 2026-08-24T22:01:11Z published: 2026-08-24T22:01:11Z canonical: "docs.trellix.com/configuring-tap-mode-using-the-web-ui" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring TAP mode using the Web UI Use the **Policy Settings** page to configure Test Access Point (TAP) mode. In TAP mode, you can configure the appliance with one or two network port pairs. The following example shows one network port pair. ![NX_TAPDeplyment_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-b1c3cc50-e01e-1900-bcad-89b67d3c11b2.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A53%3A54Z&se=2026-11-20T07%3A53%3A54Z&sr=c&sp=r&sig=1M7a1zwkXQXDPIvxXSsgFzvpPSuIv%2BjuULnghyiTiYU%3D) The following example shows two network port pairs. ![NX_TAP_WebUI_2pp_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0315bee0-4885-2a24-af57-07b59f0dcb59.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A53%3A54Z&se=2026-11-20T07%3A53%3A54Z&sr=c&sp=r&sig=1M7a1zwkXQXDPIvxXSsgFzvpPSuIv%2BjuULnghyiTiYU%3D) For details about TAP deployment, refer to the *User Guide* for your appliance model. Prerequisites - Operator or Admin access To configure TAP mode: 1. Click the **Settings** tab. 2. Click **Inline Operational Modes** on the sidebar. 3. Select the **TAP** operational mode for all available port pairs. 4. Click **Update: Operational Modes**.