--- title: "Configuring the default single-interface LAN option using the CLI" slug: "configuring-the-default-single-interface-lan-option-using-the-cli-1" tags: ["Central Management System", "Install and Get Started"] updated: 2026-10-01T14:48:54Z published: 2026-10-01T14:48:54Z canonical: "docs.trellix.com/configuring-the-default-single-interface-lan-option-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring the default single-interface LAN option using the CLI Use the commands in this section to configure the basic settings for a single-interface Central Management System cluster in a LAN deployment that uses the default ether1 interface. ### Configuring the primary node Enable HA mode: 1. Enable the CLI configuration mode: ```plaintext node1-hostname > enable node1-hostname # configure terminal ``` 2. Make the HA feature available: `node1-hostname (config) # cms feature ha available` 3. Enable HA mode: `node1-hostname (config) # ha enable` Verify and save your changes: 1. Verify your changes: ```plaintext node1-hostname (config) # show ha configuration ``` 2. Save your changes: ```plaintext node1-hostname (config) # write memory ``` Start the cluster engine: 1. Start the cluster engine: ```plaintext node1-hostname (config) # ha engine restart ``` 2. Wait for all services to be in the "running" state: ```plaintext node1-hostname (config) # show ha status ``` ### Configuring the secondary node Enable HA mode: 1. Enable the CLI configuration mode: ```plaintext node1-hostname > enable node1-hostname # configure terminal ``` 2. Make the HA feature available: `node1-hostname (config) # cms feature ha available` 3. Enable HA mode: `node1-hostname (config) # ha enable` Add the node to the cluster: 1. Add the node to the cluster: ```plaintext node2-hostname (config) # ha node join ``` 2. When prompted, enter the password for the primary node's remote admin user: ```plaintext Enter password for admin account on primary node: ******** ``` Verify and save your changes: 1. Verify your changes: ```plaintext node2-hostname (config) # show ha configuration ``` 2. Save your changes: ```plaintext node2-hostname (config) # write memory ``` Start the cluster engine: 1. Start the cluster engine: ```plaintext node2-hostname (config) # ha engine restart ``` 2. Wait for all services to be in the "running" state: ```plaintext node2-hostname (config) # show ha status ``` ### Note You can perform a manual failover to test the cluster.Failing over manually using the CLI ### Examples The following example configures the primary node in the default single-interface cluster configuration. ```plaintext node1 (config) # cms feature ha available node1 (config) # ha enable Process of enabling CM HA is initiated ... node1 (config) # show ha configuration ... node1 (config) # write memory node1 (config) # ha engine restart ... node1 (config) # show ha status ... ``` The following example configures the secondary node in the default single-interface cluster configuration. ```plaintext node2 (config) # cms feature ha available node2 (config) # ha enable Process of enabling CM HA is initiated node2 (config) # ha node join 172.16.127.144 Enter password for admin account on primary node: ******** Node joining has started Please check the status with CLI 'show ha configuration'. node2 (config) # show ha configuration ... node2 (config) # write memory node2 (config) # ha engine restart ... node2 (config) # show ha status ... ```