--- title: "Configuring the detection threshold for brute-force attacks (CLI)" slug: "configuring-the-detection-threshold-for-brute-force-attacks-cli" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-12T20:38:44Z published: 2026-09-12T20:38:44Z canonical: "docs.trellix.com/configuring-the-detection-threshold-for-brute-force-attacks-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring the detection threshold for brute-force attacks (CLI) When the IPS-enabled rules engine detects a certain number of failed login attempts to or from the same IP address occurring within a rolling 60‑second window, a brute-force attack is suspected. Based on this and other criteria, the rules engine determines whether the suspicious activity constitutes a brute-force event. The system initializes with a default threshold value for detecting brute-force events. You can configure a higher threshold to reduce false positive IPS events. ##### Prerequisites - You are logged in to the IPS appliance as an Operator or Admin. ##### Procedure To configure the detection threshold for brute-force attacks: 1. Enable the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Check the current value of the threshold. In the following example, the feature is enabled with default values. ``` hostname (config) # show ips reconnaissance Ping sweep threshold  : 20 Port scan threshold   : 200 Brute force threshold : 5 ``` 3. Configure a new brute-force threshold value. In the following example, the threshold is raised to 10. ``` hostname (config) # ips brute-force threshold 10 ``` 4. Confirm your changes. ``` hostname (config) # show ips reconnaissance Ping sweep threshold  : 20 Port scan threshold   : 200 Brute force threshold : 10 ``` 5. Save your changes. ``` hostname (config) # write memory ``` :