--- title: "Configuring the detection thresholds for reconnaissance events (CLI)" slug: "configuring-the-detection-thresholds-for-reconnaissance-events-cli" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-12T20:38:44Z published: 2026-09-12T20:38:44Z canonical: "docs.trellix.com/configuring-the-detection-thresholds-for-reconnaissance-events-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring the detection thresholds for reconnaissance events (CLI) When the IPS-enabled engine detects a certain number of failed network connections to or from the same IP address occurring within a rolling 60‑second window, a reconnaissance attack is suspected. Based on this and other criteria, the engine determines whether the suspicious activity constitutes a reconnaissance event. The system initializes with default threshold values for ping sweep detection and port scan detection. You can configure higher thresholds to reduce false positive IPS events. ##### Prerequisites - Log in to the IPS appliance as Operator or Admin. - Enable IPS detection of reconnaissance activity. See [Enabling IPS detection of reconnaissance activity (CLI)](/docs/enabling-ips-detection-of-reconnaissance-activity-cli). ##### Procedure To configure IPS detection thresholds for reconnaissance activity: 1. Enable the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Check the current status of the feature. In the following example, the feature is enabled with default values. ``` hostname (config) # show ips reconnaissance Ping sweep threshold  : 20 Port scan threshold   : 200 Brute force threshold : 5 ``` 3. Configure a new ping sweep threshold value. In the following example, the threshold is raised to 35. ``` hostname (config) # ips ping-sweep threshold 35 ``` 4. Configure a new port scan threshold value. In the following example, the threshold is raised to 300. ``` hostname (config) # ips port-scan threshold 300 ``` 5. Confirm your changes. ``` hostname (config) # show ips reconnaissance Ping sweep threshold  : 35 Port scan threshold   : 300 Brute force threshold : 5 ``` 6. Save your changes. ``` hostname (config) # write memory ``` :