--- title: "Configuring the gateway for an out-of-band drop interface using the Web UI" slug: "configuring-the-gateway-for-an-out-of-band-drop-interface-using-the-web-ui" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:23Z published: 2026-09-12T20:42:23Z canonical: "docs.trellix.com/configuring-the-gateway-for-an-out-of-band-drop-interface-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring the gateway for an out-of-band drop interface using the Web UI To select an out-of-band drop interface and configure its gateway IP: 1. Log in to your Network Security appliance Web UI. 2. In the **Settings** page, select **Inline Operational Modes** from the left pane. 3. In the **Gateway Configuration** section, select the interface from the drop-down menu as ether1 or ether2. ![GatewayConfigNX.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-981584b6-03fc-89e9-1f87-d0f5bb292fd7.png?sv=2026-02-06&spr=https&st=2026-11-20T03%3A27%3A06Z&se=2026-11-20T04%3A27%3A06Z&sr=c&sp=r&sig=LnY2FTlCYwufER0hnaDU8dNRSz88wnj%2FS6cQuUY6QxQ%3D) 4. Type the gateway IP address for the selected interface. 5. Click **Save** to save your settings. A confirmation message will appear on your screen.