--- title: "Configuring the gateway for an out-of-band drop interface" slug: "configuring-the-gateway-for-an-out-of-band-drop-interface" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-08-21T18:19:30Z published: 2026-09-12T20:42:46Z canonical: "docs.trellix.com/configuring-the-gateway-for-an-out-of-band-drop-interface" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring the gateway for an out-of-band drop interface You can enable a gateway for an out-of-band drop interface by using the Network Security appliance Web UI or CLI: - Configuring the gateway using the Web UI - Configuring the gateway using the CLI When you use ether1 or ether2 as the out-of-band drop interface and the Network Security appliance is connected to a next-hop L3 device, this feature configures the next-hop IP address to reach the original client or the server network. ### Prerequisites Administrator or operator access to the Network Security appliance.