--- title: "Configuring the ICAP server port and SSL certificate" slug: "configuring-the-icap-server-port-and-ssl-certificate-1" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T20:40:11Z published: 2026-08-24T20:40:11Z canonical: "docs.trellix.com/configuring-the-icap-server-port-and-ssl-certificate-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring the ICAP server port and SSL certificate The Intelligent Virtual Execution - Server appliance acting as an ICAP server receives traffic sent over ICAP on either the ether1 or ether2 management interface on TCP port 1344 by default. A secure ICAP connection between the Intelligent Virtual Execution - Server appliance and the ICAP client must be established on TCP port 11344 by default. You can configure the ICAP server port and SSL certificate settings using the Intelligent Virtual Execution - Server appliance CLI. By default, the Intelligent Virtual Execution - Server appliance acting as an ICAP server uses a system-self-signed certificate to establish secure communication. If you want to use another certificate, you must import the server certificate and matching key on the Intelligent Virtual Execution - Server appliance and specify the same certificate as part of the ICAP service settings. For details about how to import a server SSL certificate, see the Trellix System Security Guide.