--- title: "Configuring the mail server for health check notifications using the CLI" slug: "configuring-the-mail-server-for-health-check-notifications-using-the-cli" updated: 2026-08-25T21:18:25Z published: 2026-08-25T21:18:25Z canonical: "docs.trellix.com/configuring-the-mail-server-for-health-check-notifications-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring the mail server for health check notifications using the CLI Use the CLI commands in this topic to configure the mail server that sends health check notifications. See [System mail server settings](/docs/configuring-the-mail-server-3) for a description of each parameter. ### Note See [Configuring email recipients using the CLI](/docs/configuring-email-recipients-using-the-cli-1) for information about configuring the notification recipients. See [Configuring system event notifications using the CLI](/docs/configuring-system-event-notifications-using-the-cli-2) for information about configuring the events that trigger notifications. To configure the mail server for system notifications: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Specify the hostname or IP address of the mail server: ``` hostname (config) # email mailhub { | } ``` 3. Specify the SMTP port used by the mail server to send notifications: ``` hostname (config) # email mailhub-port ``` 4. Specify the domain name from which emails will appear to come: ``` hostname (config) # email domain ``` 5. Specify the username or fully qualified return address from which emails are sent: ``` hostname (config) # email return-addr { | } ``` 6. (Optional) Include the hostname of the mail server in the return address: ``` hostname (config) # email return-host ``` 7. Verify your changes: ``` hostname (config) # show email ``` 8. Save your changes: ``` hostname (config) # write memory ``` ### Note To remove a configuration or restore a default setting, append` no `to the command. For example, to exclude the hostname in the return address, use the` no email return-host `command, and to restore the default domain name, use the` no email domain `command. ### Examples In this example, the return address is not fully qualified, so the hostname ("hostname") and domain are appended to it. ``` hostname (config) # email mailhub 10.1.0.0 hostname (config) # email domain mail.acme.com hostname (config) # email return-addr admin hostname (config) # show email Mail hub:          10.1.0.0 Mail hub port:     25 Domain override:   mail.acme.com Return address:    admin Include hostname in return address: yes Current reply address: admin@hostname.mail.acme.com ... ``` In this example, the return address is fully qualified, so the hostname and domain are not included. ``` hostname (config) # email mailhub 10.1.0.0 hostname (config) # email domain mail.acme.com hostname (config) # email return-addr notify@acme.com hostname (config) # show email Mail hub:          10.2.0.0 Mail hub port:     25 Domain override:   mail.acme.com Return address:    notify@acme.com Include hostname in return address: yes Current reply address: notify@acme.com ... ``` In this example, all settings are restored to their default values. ``` hostname (config) # show email Mail hub:          10.3.0.0 Mail hub port:     26 Domain override:   mailhost.acme.com Return address:    admin Include hostname in return address: no Current reply address: admin@hostname.mailhost.acme.com ... hostname (config) # no email mailhub hostname (config) # no email mailhub-port hostname (config) # no email return-addr hostname (config) # email return-host hostname (config) # show email Mail hub: Mail hub port:     25 Domain override:   Return address:    do-not-reply Include hostname in return address: yes Current reply address: do-not-reply@hostname.acme.com ... ``` :