--- title: "Configuring the mail server for scheduled reports using the CLI" slug: "configuring-the-mail-server-for-scheduled-reports-using-the-cli" updated: 2026-08-25T21:18:25Z published: 2026-08-25T21:18:25Z canonical: "docs.trellix.com/configuring-the-mail-server-for-scheduled-reports-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring the mail server for scheduled reports using the CLI Use the CLI commands in this topic to configure the mail server that sends scheduled reports. See [System mail server settings](/docs/configuring-the-mail-server-3) for a description of each parameter. ### Important If you use the CLI to configure the mail server, the changes will not appear on the **Email Settings** page in the Web UI. ### Note See [Adding and removing scheduled report recipients](/docs/configuring-email-recipients-using-the-cli-1) for information about configuring the report recipients using the CLI. To configure the mail server for scheduled reports: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Specify the hostname or IP address of the mail server: ``` hostname (config) report email smtp server { | } ``` 3. Specify the SMTP port used by the mail server to send reports: ``` hostname (config) # report email smtp port ``` 4. Specify the domain name from which emails will appear to come: ``` hostname (config) # report email smtp domain ``` 5. Specify the fully qualified return address from which emails are sent: ``` hostname (config) # report email smtp return-addr ``` 6. Verify your changes: ``` hostname (config) # show report email ``` 7. Save the configuration: ``` hostname (config) # write memory ``` ### Note To remove a configuration or restore the default setting, append` no `to the command. For example, to restore the default return address, use the` no report email return-addr `command, and to remove the configured domain name, use `the no report email smtp domain `command. ### Examples In this example, the email server is configured to send scheduled reports. ``` hostname (config) # report email server 10.4.0.0 hostname (config) # report email smtp domain mailer.acme.com hostname (config) # report email smtp return-addr reports@acme.com hostname (config) # show report email Report email configurations:        SMTP server: 10.4.0.0          SMTP server port: 25        SMTP Domain: mailer.acme.com        SMTP Return addr: reports@acme.com        ... ``` In this example, all configuration settings are restored to their default values. ``` hostname (config) # show report email Report email configurations:        SMTP server: 10.4.0.0        SMTP server port: 26        SMTP Domain: acme.com        SMTP Return addr: admin@acme.com        ... hostname (config) # no email report smtp server hostname (config) # no email report smtp port hostname (config) # no email report smtp domain hostname (config) # no email report smtp return-addr hostname (config) # show report email Report email configurations:        SMTP server:        SMTP server port: 25        SMTP Domain:        SMTP Return addr: do-not-reply        ... ``` :