--- title: "Configuring the malware repository network share using the Web UI" slug: "configuring-the-malware-repository-network-share-using-the-web-ui" tags: ["Product Usage", "FX 10.x", "AX 10.x", "NX 10.x", "Customer", "Network Security"] updated: 2026-09-07T21:29:17Z published: 2026-09-07T21:29:17Z canonical: "docs.trellix.com/configuring-the-malware-repository-network-share-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring the malware repository network share using the Web UI The **Malware Repository Configuration** page is used to configure the settings for the malware repository network share and the repository paths for each guest image. A green status icon indicates that the network share is mounted successfully by the Malware Analysis appliance, and the configured directory paths are correct. A red status icon indicates that the username is not valid, authentication failed, or the repository path does not exist. ### Prerequisites - Administrator access to the Malware Analysis appliance. - Install the guest images on the Malware Analysis appliance. For details about installing the guest images, see Guest images. - Determine the guest images for which you want to configure the repositories. - Determine the IP address of the server you want to use for the network share. - Verify that the Malware Analysis appliance can communicate with the network share site from your local machine before configuring the malware repository for unattended mode. - Copy the files to the configured network share source directory locations. - Configure the malware repository paths for each guest image. **To configure the settings for the malware repository network share:** 1. In the Web UI, choose **Settings** > **Malware Repository**. 2. Enter either the SMB or CIFS path to the network share in the **Share URL** box using the following format: *protocol://IP address of the network server/share name* For example, **cifs://172.16.220.88/puertorico** 3. Enter the user credentials and security password configured for the network share. > [!NOTE] > Note > > These user credentials are different from the credentials used to access the Malware Analysis appliance. 4. Select the **Enable VNC** checkbox to enable VNC to the VM during the repository analysis. 5. Click **Update**. **To configure the directory paths that are associated with each guest image repository:** 1. In the Web UI, choose **Settings** > **Malware Repository**. 2. Enter the malware repository directory only for the source (Input/src) paths for each guest image in the **Input Path** column. 3. Select a polling intervals from the **Poll Period** drop-down list. - 5 min - 10 min - 1 hour - 1 day 4. Click **Update**.