--- title: "Configuring the maximum number of ICAP connections using the CLI" slug: "configuring-the-maximum-number-of-icap-connections-using-the-cli-1" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T20:40:11Z published: 2026-08-24T20:40:11Z canonical: "docs.trellix.com/configuring-the-maximum-number-of-icap-connections-using-the-cli-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring the maximum number of ICAP connections using the CLI Use the CLI commands in this topic to configure the maximum number of simultaneous connections allowed on the Intelligent Virtual Execution - Server appliance acting as an ICAP server. The maximum number of connections that you can configure is specific to each appliance model. **Prerequisites** - Administrator access to the Intelligent Virtual Execution - Server appliance - Make sure that the third-party device settings are configured so that the device can act as an ICAP client. For details, see [ICAP client configuration prerequisites](/network-and-platform/docs/icap-client-configuration-prerequisites-1). - You have enabled the ICAP service on the Intelligent Virtual Execution - Server appliance. For details, see [Enabling or disabling ICAP service using the CLI](/network-and-platform/docs/enabling-or-disabling-the-icap-service-1). - You have enabled the request and response modification mode. For details, see [Enabling or disabling ICAP request and response modification modes using the CLI](/network-and-platform/docs/enabling-or-disabling-the-icap-request-and-response-modification-modes). - You have configured the ICAP service settings so that the Intelligent Virtual Execution - Server appliance can run an ICAP server. For details, see [Configuring the ICAP server port and SSL certificate using the CLI](/network-and-platform/docs/configuring-the-icap-server-port-and-ssl-certificate-1). **To configure the maximum number of ICAP connections:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Specify the maximum number of ICAP connections. ``` hostname (config) # icap-service max-connections ``` The maximum number of ICAP connections can range from 128 to 512. By default, the maximum number of ICAP connections is 128. 3. Verify the maximum number of ICAP connections. ``` hostname (config) # show icap-service config ICAP Configuration:    .    .    .  TCP port                   :  1344  Secure port                :  11344  Secure Certificate         :  system-self-signed  Max Connection             :   128 ``` The "`Max Connection:`" line displays the maximum number of ICAP connections allowed on the Intelligent Virtual Execution - Server appliance acting as an ICAP server.