--- title: "Configuring the submission interface" slug: "configuring-the-submission-interface" tags: ["Product Usage", "IVX Cloud", "Sec Ops and Analytics"] updated: 2026-09-02T06:39:04Z published: 2026-09-04T14:05:44Z canonical: "docs.trellix.com/configuring-the-submission-interface" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring the submission interface The submission interface is used for communication between sensors and the cloud broker. By default, the submission interface is defined to be *ether1*. Trellix recommends that you configure another management interface (such as ether2), not a monitoring interface, for the submission interface. This prevents the ether1 management interface from becoming too busy, and keeps management and data traffic separate. However, ether2 cannot be used as both the submission interface and the URL Dynamic Analysis interface on an Email Security — Server sensor. If the sensor and cloud broker are in different subnets, you must define the default gateway for the interface. ### Note DHCP is not supported on the submission interface. Ether1 is the only supported submission interface on File Protect sensors. Prerequisites - Operator or Admin access :