--- title: "Configuring user authentication using the Web UI" slug: "configuring-user-authentication-using-the-web-ui-3" updated: 2026-08-25T21:18:33Z published: 2026-08-25T21:18:33Z canonical: "docs.trellix.com/configuring-user-authentication-using-the-web-ui-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring user authentication using the Web UI Use the **Sensors** page to configure authentication parameters for the remote user the Central Management System appliance uses to log in to an appliance to establish the connection. This is an existing "admin" user on the managed appliance. ![CM_UserAuth_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-5cfca682-5e93-794d-6a8e-00727d18cef6(1).png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A23%3A42Z&se=2026-11-20T07%3A23%3A42Z&sr=c&sp=r&sig=0rYxHlaD822fIMgasSZddfhyk0sktVi6czO3f3bm2Bg%3D) When you add an appliance using the Web UI, you must configure a username and password, so the Central Management System appliance initially uses password authentication. After the appliance is connected, you can select an SSH-DSA2 or SSH-RSA2 key, which changes the authentication type accordingly. ### Important After you configure SSH-DSA2 or SSH-RSA2 authentication, the only way to return to password authentication using the Web UI is to delete the appliance and then add it again. To configure SSH-RSA2 or SSH-DSA2 authentication: 1. In the appliance row, click **Select** > **Use CMS Public Key to Connect**. The **Password** field is replaced by the **CMS Public Key** field. ![CM_AddToCMAuthKey_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-d49201a1-5e30-310b-8695-8ef62c28fd3e(1).png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A23%3A42Z&se=2026-11-20T07%3A23%3A42Z&sr=c&sp=r&sig=0rYxHlaD822fIMgasSZddfhyk0sktVi6czO3f3bm2Bg%3D) 2. Click the **Select a key** drop-down list. 3. To configure SSH-RSA2 authentication, do one of the following: - Select an existing key. - Select **No RSA keys. Create one**, and then select the **rsa-admin** key that is created. 4. To configure SSH-DSA2 authentication, do one of the following: - Select an existing key. - Select **No DSA keys. Create One**, and then select the **dsa-admin** key that is created. 5. Click **Update**. ### Note The connection will be interrupted briefly. Error messages and indicators will be displayed, but they will clear as soon as the connection is reestablished. 6. Verify that the key is displayed in the **Public Key Used** column for the appliance. :