--- title: "Configuring virtual network peering" slug: "configuring-virtual-network-peering" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-10-01T10:16:13Z published: 2026-10-01T10:16:13Z canonical: "docs.trellix.com/configuring-virtual-network-peering" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring virtual network peering When the two HA nodes are in different Azure regions, Azure virtual network peering must be used for the nodes to communicate with each other. For illustration, the following peering configuration values will be used for the two Central Management System virtual machines. | Field | CM-1 | CM-2 | | --- | --- | --- | | Virtual network/subnet | Net-1/Sub-1 | Net-2/Sub-2 | | This peering link | Peer-1 | Peer-2 | | Peering link name (remote) | Peer-2 | Peer-1 | | Subscription (remote) | Subscript-2 | Subscript-1 | | Virtual network (remote) | Net-2/Sub-2 | Net-1/Sub-1 | To configure virtual network peering: 1. In the Azure portal Dashboard, select **Virtual Machines**. 2. Select the **CM-1** virtual machine. 3. Under **Essentials**, locate the **Virtual network/subnet** and **Subscription** fields and record their values for later use. 4. Select the **CM-2** virtual machine and repeat the previous step. 5. In the Azure portal Dashboard, select **Virtual Networks**. 6. Select **Net-1/Sub-1** and then click the **Peerings** tab. 7. Click **Add** and complete the fields in the **Add peering page** as shown in the table above. Specify other settings according to your network requirements and click **Add**. 8. Select **Net-2/Sub-2** and repeat the previous two steps. 9. Go to [Assigning a "dummy" static IP address](/network-and-platform/docs/assigning-a-dummy-static-ip-address). :