--- title: "Connect the Active Fail-Open module to a Sensor" slug: "connect-the-active-fail-open-module-to-a-sensor" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T07:33:43Z published: 2026-09-17T07:33:43Z canonical: "docs.trellix.com/connect-the-active-fail-open-module-to-a-sensor" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect the Active Fail-Open module to a Sensor Connecting the Active Fail-Open module involves the following steps: **Steps:** 1. Ear mount the Fail-Open module. 2. Insert the QSFP28 transceiver (SR4 type) into the Fail-Open Module ports (**MON0** and **MON1**). 3. Plug an inside network cable connector (MTP/MPO MM type) into the Network port labeled **NET0** on the Active Fail-Open module. 4. Plug the other end of this cable into the corresponding network device. 5. Plug an outside network cable into the Network port labeled **NET1** (MTP/MPO MM type) on the Active Fail-Open module. 6. Plug the other end of this cable into the corresponding network device. 7. Plug a proper fiber cable (inside) into the monitoring port of the Sensor. 8. Plug the other end of the cable into the appliance port labeled **MON0** on the Active Fail-Open module. 9. Plug a proper fiber cable (outside) into the corresponding peer port of the Sensor. (For example, if you have used monitoring port 1, plug the cable into monitoring port 2.) 10. Plug the other end of the cable into the appliance port labeled **MON1** on the Active Fail-Open module. > [!NOTE] > Note > > With this cable configuration, Sensor monitoring port 1 views traffic as originating inside the network, and port 2 views traffic as originating outside the network. Note that this configuration (1 = outside, 2 = inside) must match the port configuration specified for the Sensor and that the ports must be enabled. For more information on port configuration accomplished via the Trellix IPS Manager, refer to the *IPS Administration* section in the *Trellix Intrusion Prevention System Product Guide*.