--- title: "Connect the cable to the Auxiliary port" slug: "connect-the-cable-to-the-auxiliary-port" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:52Z published: 2026-09-17T09:43:52Z canonical: "docs.trellix.com/connect-the-cable-to-the-auxiliary-port" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect the cable to the Auxiliary port You can use the Auxiliary port as well for modem access to the Sensor for setup and configuration. You cannot use a modem the first time you configure a Sensor. 1. For modem connections, plug a straight-through modem cable into the Auxiliary port on the NS-series Sensor. This port is labeled **Aux** in the Sensor rear panel. 2. Connect a modem to the **Aux** port. 3. Connect a telephone line to the modem. Required settings for the **Aux** port are given below: | Name | Setting | | --- | --- | | Baud rate | 115200 | | Number of bits | 8 | | Parity | None | | Stop bits | 1 | | Flow control | None |