--- title: "Connect the cable to the Management port" slug: "connect-the-cable-to-the-management-port-1" tags: ["Hardware"] updated: 2026-09-17T10:37:47Z published: 2026-09-17T10:37:47Z canonical: "docs.trellix.com/connect-the-cable-to-the-management-port-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect the cable to the Management port The Sensor communicates with the Manager using the Management port. 1. Plug in a Category-5e/6/6a Ethernet cable into the Management port. This port is labeled **MGMT** in the front panel of the NS3600 Sensor. ![Sensor_MGMT_Port.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-78d5b15d-2e25-6b24-3260-627b80723b1e.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A22%3A19Z&se=2026-11-20T09%3A22%3A19Z&sr=c&sp=r&sig=GjekxCduqpITJVcGHGMd%2F%2B95VZwPtN6QTurbKD%2FjCIs%3D) 2. Plug in the other end of the cable into the network device connected to your Manager server. > [!NOTE] > Note > > To isolate and protect your management traffic, Trellix strongly recommends using a separate, dedicated management subnet to interconnect the Sensors and Manager.