--- title: "Connect the cable to the Management port" slug: "connect-the-cable-to-the-management-port-2" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:52Z published: 2026-09-17T09:43:52Z canonical: "docs.trellix.com/connect-the-cable-to-the-management-port-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect the cable to the Management port The Sensor communicates with the Manager using the Management port. 1. Plug a Category 5e Ethernet cable into the Management port. This port is labeled **Mgmt** in the rear panel of the NS-series Sensor. 2. Plug the other end of the cable into the network device connected to your Manager server. > [!NOTE] > Note > > To isolate and protect your management traffic, Trellix strongly recommends you to use a separate, dedicated management subnet to interconnect the Sensors and the Manager.