--- title: "Connect the cable to the Management port" slug: "connect-the-cable-to-the-management-port-7" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:45Z published: 2026-09-17T09:43:45Z canonical: "docs.trellix.com/connect-the-cable-to-the-management-port-7" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect the cable to the Management port The Sensor communicates with the Manager using the Management port. 1. Plug a Category 5e Ethernet cable into the Management port. This port is labeled **MGMT** in the rear panel of the NS5x00 Sensor. ![GUID-727602C4-9614-42E3-99E4-81E4224D8B52-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-1bc89c7f-ad4e-3d87-9f4d-c0fca927676a.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A53Z&se=2026-11-20T11%3A34%3A53Z&sr=c&sp=r&sig=bCGa3oj0jMhPmKWsrfTH5VJQSutnfOXz0jinPHUO6q8%3D) 2. Plug the other end of the cable into the network device connected to your Manager server. > [!NOTE] > Note > > To isolate and protect your management traffic, Trellix strongly recommends you to use a separate, dedicated management subnet to interconnect the Sensors and the Manager.