--- title: "Connect the cable to the Management port" slug: "connect-the-cable-to-the-management-port-8" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:41Z published: 2026-09-17T09:43:41Z canonical: "docs.trellix.com/connect-the-cable-to-the-management-port-8" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect the cable to the Management port The Sensor communicates with the Manager using the Management port. **Steps:** 1. Plug a Category 5e or 6a Ethernet cable into the Management port. This port is labeled **MGMT** in the front panel of the NS3x00 Sensor. ![GUID-2FC40E42-6480-4CB0-87E6-F003811306C0-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-5759ab6e-0888-9b73-b0f7-6fa90ac2ecdd.png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A01%3A06Z&se=2026-11-20T12%3A01%3A06Z&sr=c&sp=r&sig=0EW7KE8UpBrqIfsZadp5tkQhefCusVJ5883S%2F5DxRHY%3D) 2. Plug the other end of the cable into the network device connected to your Manager server. > [!NOTE] > Note > > To isolate and protect your management traffic, Trellix strongly recommends using a separate, dedicated management subnet to interconnect the Sensors and the Manager.