--- title: "Connect the cable to the Management port" slug: "connect-the-cable-to-the-management-port-9" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:41Z published: 2026-09-17T09:43:41Z canonical: "docs.trellix.com/connect-the-cable-to-the-management-port-9" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect the cable to the Management port The Sensor communicates with the Manager using the Management port. **Steps:** 1. Plug a RJ-45 cable into the Management port. This port is labeled **MGMT** in the front panel of the NS3500 Sensor. ![GUID-3F09500B-4C53-41DF-94C9-2CA8F7EF9468-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0075aff4-28d8-7dec-c661-f146b109ca16.png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A28%3A49Z&se=2026-11-20T12%3A28%3A49Z&sr=c&sp=r&sig=dJ%2BPx15ITMmjz0jSFMa2yW4oXE9YcFJD3EcMpMOdmK0%3D) 2. Plug the other end of the cable into the network device connected to your Manager server. > [!NOTE] > Note > > To isolate and protect your management traffic, Trellix strongly recommends you to use a separate, dedicated management subnet to interconnect the Sensors and the Manager.