--- title: "Connect the cable to the Response port" slug: "connect-the-cable-to-the-response-port" tags: ["Hardware"] updated: 2026-09-17T10:17:59Z published: 2026-09-17T10:17:59Z canonical: "docs.trellix.com/connect-the-cable-to-the-response-port" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect the cable to the Response port When operating in tap or SPAN mode, the Sensor uses its Response port to respond to attacks. When deployed in tap mode, the Sensor does not inject response packets through the tap but uses the Response port. 1. Plug a Cat 5e Ethernet cable or, Cat 6A Ethernet cable into the Response port. This port is labeled **R1** on the Sensor rear panel. 2. Connect the other end of the cable to the network device, such as a hub, switch, or a router, through which you want to respond to attacks.