--- title: "Connect the cables for SPAN or hub mode" slug: "connect-the-cables-for-span-or-hub-mode" tags: ["Hardware"] updated: 2026-09-17T10:17:59Z published: 2026-09-17T10:17:59Z canonical: "docs.trellix.com/connect-the-cables-for-span-or-hub-mode" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect the cables for SPAN or hub mode When you monitor in SPAN or hub mode on the Sensor, you use only single ports. To connect an Sensor to a SPAN port or hub, plug an LC fiber-optic or RJ-45 cable into one of the modules and connect the other end of the cable to the SPAN port or the hub.