--- title: "Connect the cables for tap mode" slug: "connect-the-cables-for-tap-mode-2" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:52Z published: 2026-09-17T09:43:52Z canonical: "docs.trellix.com/connect-the-cables-for-tap-mode-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect the cables for tap mode To deploy the Sensor in tap mode, you must use a Sensor's ethernet monitoring port pair with a third-party external tap. > [!NOTE] > Note > > For a list of Trellix-approved third party vendors, see the KnowledgeBase at [https://support.trellix.com](https://support.trellix.com). Enter the relevant KnowledgeBase article in **Search the Support Knowledge Center** and click **Search** to locate the relevant KnowledgeBase article. **Steps:** 1. Plug the ethernet cable into one of the monitoring ports, for example, port 3. 2. Plug the cable into one of the monitoring ports labeled 4. 3. Connect the other end of each cable to the tap. 4. Connect the network devices that you want to monitor to the tap.