--- title: "Connect the cables to the Interconnect ports" slug: "connect-the-cables-to-the-interconnect-ports" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:52Z published: 2026-09-17T09:43:52Z canonical: "docs.trellix.com/connect-the-cables-to-the-interconnect-ports" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect the cables to the Interconnect ports Communication between the NS9300P and NS9300S occurs over the Interconnect ports. **Steps:** 1. Plug the supplied 40G Direct Attach cable into port G0/1 of the NS9300P Sensor and connect the other end of the cable into port G4/1 of the NS9300S Sensor. 2. Plug the supplied 40G Direct Attach cable into port G0/2 of the NS9300P Sensor and connect the other end of the cable into port G4/2 of the NS9300S Sensor. 3. Plug the supplied cable into the Response port (R1) of NS9300P Sensor and connect the other end of the cable into the Management port (Mgmt) port of the NS9300S Sensor.