--- title: "Connect the fail-open switch to network devices" slug: "connect-the-fail-open-switch-to-network-devices-1" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T07:33:43Z published: 2026-09-17T07:33:43Z canonical: "docs.trellix.com/connect-the-fail-open-switch-to-network-devices-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect the fail-open switch to network devices **Prerequisites:** - If you are connecting a copper fail-open switch, make sure that you have two Cat 5/Cat 5e Ethernet cables. - If you are connecting a fiber fail-open switch, make sure that you have two LC-LC cables. ![GUID-7314BFDB-A22D-4244-8579-311C21221429-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-6488247a-93c8-2ace-4e7d-6c85961b88eb.png?sv=2026-02-06&spr=https&st=2026-11-20T15%3A36%3A55Z&se=2026-11-20T16%3A36%3A55Z&sr=c&sp=r&sig=fuQn7L6e1B7WOLjHATli7Ho6DIG6JbnTNJQC2YKbpN8%3D) | Callout | Description | | --- | --- | | 1 | Passive fail-open switch | | 2 | Fail-Open Control port (RJ-11) | | 3 | Control port on the fail-open switch (RJ-45) | | 4 | Control cable (RJ-45 to RJ-11) | | 5 | Connection to the network device (inside) | | 6 | Connection to the network device (outside) | | 7 | Connection to Monitoring port G0/1 of the Sensor (inside) | | 8 | Connection to Monitoring port G0/2 of the Sensor (outside) | The steps provide the procedure for connections of both copper and fiber fail-open switches. 1. Connect the inside network cable connector to the Cat 5/Cat 5e/LC port, labeled **Network A** on the fail-open switch. 2. Connect the other end of this cable to the corresponding network device. 3. Connect the outside network cable connector into the Cat 5/Cat 5e/LC, labeled **Network B** on the fail-open switch. 4. Connect the other end of this cable to the corresponding network device. **Result:** The fail-open switch is now connected to network devices for the inside network and outside networks. Your next step is to connect the fail-open switch to the Sensor.