--- title: "Connect the fail-open switch to network devices" slug: "connect-the-fail-open-switch-to-network-devices" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T07:33:43Z published: 2026-09-17T07:33:43Z canonical: "docs.trellix.com/connect-the-fail-open-switch-to-network-devices" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect the fail-open switch to network devices ![GUID-C55B915E-0C2C-42F5-8C86-ACE4EBEA6990-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-050dc9d1-3177-078a-5b18-04be17db1bca.png?sv=2026-02-06&spr=https&st=2026-11-20T18%3A33%3A30Z&se=2026-11-20T19%3A33%3A30Z&sr=c&sp=r&sig=ttftswAOm%2BAZ98l%2F2dWp%2BTNkDHt80OIqjc6TBx60rPI%3D) | Callout | Description | | --- | --- | | 1 | 10/100/1000 Copper fail-open switch module | | 2 | Connection to a network device (inside) | | 3 | Connection to a network device (outside) | | 4 | Sensor monitoring port **G3/1** (inside) | | 5 | Sensor monitoring port **G3/2** (outside) | | 6 | Sensor monitoring ports on an NS9500 Sensor. | The steps below provide steps for connections for both copper and fiber fail-open switches. **Steps:** 1. Plug the inside network cable connector into the Cat 5/Cat 5e/LC port, labeled **Net 0** on the fail-open switch. 2. Plug the other end of this cable to the corresponding network device. 3. Plug the outside network cable connector into the Cat 5/Cat 5e/LC port, labeled **Net 1** on the fail-open switch. 4. Plug the other end of this cable to the corresponding network device. **Result:** The fail-open switch is now connected to network devices for the inside network and outside network. Your next step is to connect the fail-open switch to the Sensor.