--- title: "Connect the management port" slug: "connect-the-management-port" updated: 2026-09-08T19:56:54Z published: 2026-09-08T19:56:54Z canonical: "docs.trellix.com/connect-the-management-port" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect the management port When you connect your network device to the Intelligent Sandbox Appliance, you can configure the appliance IP address and other parameters for integration in your network. 1. On the rear panel, plug the Category 5e or 6 Ethernet cable in the Ethernet port 1 ![GUID-8E0807CD-48FD-47BB-B72B-927D66FCBD91-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-3be3c33c-8080-ace2-2b92-5f4b39c6d869.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A44%3A38Z&se=2026-11-22T15%3A44%3A38Z&sr=c&sp=r&sig=vD%2Bsu1foFEqHjvlmSJD8ugHKcK4XrdFUCbwZmXQjDEw%3D). The Ethernet port 1 is the ATD Management port. 2. Plug the other end of the cable into the network device. :