--- title: "Connect the supplied console cable to the Console port" slug: "connect-the-supplied-console-cable-to-the-console-port" tags: ["Hardware"] updated: 2026-09-21T07:13:50Z published: 2026-09-21T07:13:50Z canonical: "docs.trellix.com/connect-the-supplied-console-cable-to-the-console-port" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect the supplied console cable to the Console port The Console port on the NS3600 Sensor is used for setup and configuration of the Sensor. **Steps:** 1. For console connections, plug in one end (RJ45) of the console cable supplied by Trellix into the Console port on the Sensor. This port is labeled **Console/USB** in the Sensor front panel. ![Sensor_ConsolePort.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-bd54f11e-4343-e84d-8248-65c90c46ee43.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A18Z&se=2026-11-20T09%3A36%3A18Z&sr=c&sp=r&sig=XshebkzRtIhtLcPOtp3kPWC8qAru39blHVboqpCyyMc%3D) 2. Connect the other end (DB9) of the Console port cable directly to a COM port of the computer or terminal server you will use to configure the Sensor, for example, a computer running correctly configured Windows HyperTerminal software (i.e., PuTTY). You must connect directly to the console for initial configuration; you cannot configure the Sensor remotely. Terminal servers are provided for console access. Required settings for HyperTerminal are listed below: | Name | Setting | | --- | --- | | Baud rate | 115200 | | Number of bits | 8 | | Parity | None | | Stop bits | 1 | | Flow control | None | 3. Turn on the Sensor.