--- title: "Connecting heartbeat cables" slug: "connecting-heartbeat-cables-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/connecting-heartbeat-cables-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connecting heartbeat cables There is no standard heartbeat port across all Sensor models. Instead, the port or ports you use to connect the two Sensors for failover depends directly on the model at hand. The details are as follows: | NS-series Sensor model | Port used for heartbeat connection | | --- | --- | | NS9600 standalone | G0/1 | | NS9600 stack (2-node) | G0/3 | | NS9500 | G0/1 | | NS9300 | G1/1 and G1/2 | | NS9200 | G0/1 | | NS9100 | G0/1 | | NS7600 | - G0/1 for 5 Gbps capacity - G0/1 and G0/2 for 10 and 15 Gbps capacity | | NS7500 | G0/1 | | NS7350 | G0/1 | | NS7250 | G0/1 | | NS7150 | G0/1 | | NS7300 | G0/1 | | NS7200 | G0/1 | | NS7100 | G0/1 | | NS5200 | G1/1 and G1/2 | | NS5100 | G1/1 and G1/2 | | NS3600 | 5 | | NS3200/NS3100 | 1 | > [!NOTE] > Note > > High availability is not supported in NS3500 Sensor model.